PROFESSIONAL SPINNING BIKE BT WT1

Buy BICICLETA SPINNING PROFESSIONAL BT WT1

PROFESSIONAL BRINNING BT WT1 Characteristics

Spinning bike for professional use . Measurements 128 x 61 x 112 cm weight 75 kg capacitive touchscreen 4.7? with measurements: 164 x 122 x 35mm. Compatible with my bodytone® app and bodytone indoor bike group®. Functions: fc, fcmax, ftp, w/kg, kcal, speed, distance, spins (number, mean calculation of watts and rpm of each series). Bt calibrating system® 95.5% of calibration reliability. maximum user weight 150 kg aluminum inertia steering wheel, being of this material we avoid oxide. Equivalent to 20 kg. poly v® belt transmission. The poly v® has been designed with a greater contact surface than the trapezoidal or flat straps. The best transmission relationship with a normal belt. lateral and frontal protective protections of the steering wheel and the pedalier shaft manufactured in tpr, which prevents the oxide and corrosion produced by the sweat. Abstract rear protectors for stretching on both sides and in the central tube. Mixed spd pedals. Vp components x-93. Double use, perfect to use it with cycling shoes with coves and normal sports shoes. factor q 160 mm ergonomic handlebars adapted from road biking with double grip: upper and lower aerodynamic position. Vertical regulation and horizontal slider, with 6 positions numbered to laser and printed. Porous foam coating, antiallergic and easy to clean. Easy block conditioners. aluminium handlebar tile with 7 laser and printed positions. pedalier shaft special design, larger and striated with ntn bearings, with double system on the right side. This double bearing reinforces our pedalier axis to avoid torsions. cushion base in eva special for the practice of the indoor cycle. Covered in similes of skin. Antiprostatic design with emptying in extra comfort pelvic area. Seat with damping system. Aluminum seat settings with micro settings, 17 different vertical positions and 10 horizontal positions numbered to laser and printed. Easy block conditioners. Aluminum saddle tile with numbering of laser and printed positions. safety emergency brake using intensity regulator. magnetic brake by means of four neodymium magnets. accessories in pvc and aluminium. 3 mm thick steel pipe structure welded by robotic process. transport wheels on the front to facilitate displacement. levelers 4 levelers in height facilitating stability. painting process 3 layers of paint. Decaped and stabilized steel by total immersion of parts in different degreasing dissolutions to ensure perfect and complete cleaning of the base material. Antioxidant implantation to ensure proper insulation of internal oxidation and good adherence to paint. 2 final layers of epoxy paint of powdered polyester, drying at 240oc. process of design study of biomechanics and ergonomics under the supervision of professionals and associate athletes. After a long period of design; from the sketch, engineering research, prototype production, test by professional athletes our products go to the market.